复杂小断块油藏CO2吞吐工艺技术分析

在总结复杂小断块油田CO2吞吐系列配套技术的基础上，分别从油藏规模、物性、能量等角度剖析了71口吞吐井的实施效果，分析了影响CO2吞吐效果的关键参数，得出了注入量、注入压力、返排速度、吞吐周期等工艺技术参数的取值范围和标准，对提高采收率具有重要意义。     

大港油田官109-1断块稠油油藏碱/表面活性剂吞吐采油技术

大港油田官109-1断块稠油油藏的油井由于井筒、近井地带发生原油有机沉积,储层原油流动性差,采用多种方法都不能正常生产。为此研制了一种碱性解堵液,用于油井化学吞吐。该解堵液为复配碱和抗硬剂等添加剂的10%两性木质素表面活性剂溶液,能使玻璃片表面由亲油变强亲水,在石英上的接触角为6°(稀释至1/2和1/4浓度时为11°和12°),与羊大站原油间的界面张力为1.75×10-3~3.18×10-3mN/m。该解堵液与黏度1~50 Pa.s的不同区块稠油按体积比1∶1混合形成的乳状液,60℃、175 s-1黏度为2~6 mPa.s,在配液水矿化度高达6000mg/L以上或钙镁离子浓度高达250 mg/L时,该解堵液仍能保持对稠油的乳化降黏能力。该解堵液从实验岩心中驱出的原油量比地层水多75%,驱出液为乳状液。通过一个井例介绍了化学吞吐工艺:先用一种降黏解堵液对油井进行预处理,清洗油管、炮眼及近井地带,再注入碱性解堵液(该井例中为500 m3),注入时间约15小时,然后开井生产。2000年2月至2002年6月在16口新投产井实施化学吞吐(第一轮次),15口井有效,其中2口井先后转注水,其余13口井到2005年底仍继续产油。图1表6参5。     

创建FTP服务器和设计磁盘配额的方法与实现

FTP是网络系统提供的基本服务之一．用户可以通过FTP上传和下载文件。本文介绍Linux系统的FTP服务器的原理以及建立FTP服务器和对FTP用户的磁盘配额进行设置。     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

MIMO系统中的分组全分集全码率空时编码

针对未编码的多输入多输出（MIMO，Multi—Input Multi—Output）系统，提出一种复杂度适中的分组全分集全码率（GFDFR，Group—wise Full Diversity Full Rate）空时编码方案。该方案通过在发送端进行天线分组，各组独立编码，减小全分集全码率（FDFR，Full Diversity Full Rate）编码块的大小从而降低系统编解码复杂度；在频率选择性信道中，进一步对子载波分组进行独立编码，获得频率分集（或多径分集），以适中的复杂度在不降低系统分集度的情况下保证了信息的全码率传输，是一种在MIMO信道中极具实用价值的空时编码方案。     

东营凹陷滚动勘探开发技术研究与应用

东营凹陷已进入勘探开发成熟期 ,滚动勘探开发是增储稳产的主要手段 ,精细油藏描述是其关键。总结滚动勘探开发的 4种方式 (老区扩边、发现新块、发现新层系和新区滚动勘探开发 ) ,对断块复杂程度提出按每平方千米内所有断层的累加长度划分的新方法 ,从构造描述、储集层描述和油藏描述方面介绍了滚动勘探开发的技术方法。以永 8断块为例 ,在层位标定、反射特征分析、构造描述流程、地震地质分析等方面进行深入分析 ,归纳精细油藏描述的具体方法 ,强调了三维地震数据体的相干分析、属性分析等技术的重要作用。应用这一滚动勘探开发技术 ,使东营凹陷每年新增滚动储量近2 0 0 0× 10 4 t。图 3参 10     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。     

Synthesis and properties of novel amphiphilic sulfated ionomers by the ring‐opening reaction of an epoxidized styrene–butadiene–styrene triblock copolymer

A method for the synthesis of novel sulfated ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed. SBS was first epoxidized by performic acid in the presence of a phase‐transfer catalyst; this was followed by a ring‐opening reaction with an aqueous solution of alkali salt of bisulfate. The optimum conditions for the ring‐opening reaction of the epoxidized SBS with an aqueous solution of KHSO₄ were studied. During the ring‐opening reaction, both phase‐transfer catalyst and ring‐opening catalyst were necessary to enhance the conversion of epoxy groups to ionic groups. The products were characterized with Fourier transform infrared spectrophotometry and transmission electron microscopy (TEM). After the potassium ions of the ionomer were substituted with lead ions, the lead sulfated ionomer exhibited dark spots under TEM. Some properties of the sulfated ionomer were studied. With increasing ionic groups or ionic potential of the cations, the water absorbency and emulsifying volume of the ionomer and the intrinsic viscosity of the ionomer solution increased, whereas the oil absorbency decreased. The sulfated ionomer possessed excellent emulsifying properties compared with the sulfonated SBS ionomer. The sodium sulfated ionomers in the presence of 10% zinc stearate showed better mechanical properties than the original SBS. When the ionomer was blended with crystalline polypropylene, a synergistic effect occurred with respect to the tensile strength. The ionomer behaved as a compatibilizer for blending equal amounts of SBS and oil‐resistant chlorohydrin rubber. In the presence of 3% ionomer, the blend exhibited much better mechanical properties and solvent resistance than the blend without the ionomer. SEM photographs indicated improved compatibility between the two components of the blend in the presence of the ionomer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008